There is no signal on Tricolor TV - what to do?
Of course, today priority is given to satellite television. One of these is digital satellite television Tricolor TV. In short, this is a fairly high-quality and diverse satellite television. Also, the cost of Tricolor TV is extremely reasonable. But here, too, there are errors and failures. We will now examine one of these. This error is extremely common and consists of the following: when you turn on the TV, the message “No signal” appears on its screen. There may be several reasons for this error. Most often, this message appears when the satellite dish is faulty or TV tuner incorrectly connected to the TV.
Often the "No Signal" message appears during bad weather. In this situation, you just need to wait out this weather.
System settings may also fail. In this situation, you can update the settings yourself. To do this, go to the main menu, and then select and click on the item "Tricolor TV". By clicking on this button you will enable updating of your satellite TV settings and channels. Once the update is complete, everything should work.
An error of this kind can occur if the connection is damaged. You can also check this yourself. To do this, you need to check the cable connection between the antenna and the receiver. It would not be superfluous to check the integrity of the cable throughout the entire connection section.
If none of the above helps, then you need to change the location TV antenna. Errors of this kind can occur due to antenna problems. This should be done evenly and carefully. You need to gradually change the location of the antenna by 1-2 centimeters and hold it in each position for at least 5 seconds. This must be done until an image appears on the Tricolor information channel. We have looked at the most popular methods that will help you if you are using Tricolor TV satellite television and the message “No Signal” appears on your TV screen.
