Making a homemade antenna for a TV
The most popular today is спутниковое телевидение. It has a low cost, excellent quality, and a huge selection of channels. But nevertheless, many people use analog television services. This is television, the signal of which is transmitted through a regular television antenna. This TV especially relevant in the country. Agree that if you spend 2-3 months a year at your dacha, you don’t want to install satellite TV on it. The best option would be analog television. Moreover, a television antenna for such television can be made manually.
We will take the simplest route and show you how to make a diamond-shaped antenna. This antenna looks extremely simple, but it picks up the signal quite well. This is what it should look like.
Diamonds for the antenna can be made from thick wire. Each diamond will require approximately 180 centimeters of wire. You need to bend such a wire so that each side of the rhombus is 45 centimeters.
You can fasten the two resulting diamonds by welding, or you can use a drill. It is much more convenient to do all this by welding. But if it is not there, then it is better to flatten the place where the diamonds are attached and only then fasten them with screws and a small iron plate.
You need to attach an antenna amplifier to the connecting bar, which can be twisted from an old antenna or bought in a store. Luckily it's inexpensive. To finish everything off, you need to paint the entire antenna. This will prevent moisture from entering the antenna contacts.
What remains to be done? Of course, connect the TV cable to the amplifier. Then secure the antenna to a special riser, which will later need to be installed in a place convenient for you. You can make a television antenna yourself. To do this you will need a little patience and the same amount of time.
