Resetting the "diaper" counter in the Epson l110 printer

One of the most popular peripheral devices is the printer. It is found in almost every home. There are laser and inkjet printers. If you have an inkjet printer, then you are probably familiar with the word “printer diaper”. This is not a baby diaper, but an absorbent pad in a printer. Its main purpose is to collect pumped ink and its unnecessary clots. When the printer’s “diaper” is full, the device itself stops working. In this situation, you need to replace the gasket itself or clean the old one. You can also reset the diaper counter.

The fact is that many printers have a “diaper” counter. It takes into account the amount of ink released during pumping, and as soon as the maximum counter value approaches, the printer is blocked. Today we will tell you how to reset the diaper on the Epson L110 printer.

First of all, you need to download the SSC Service Utility program. You can download it v lyubom browser follow the link that you will find at the end of the article. Next, install and launch the program. Now we need to configure the program for the printer we need.

An example setting for the printer is shown in the screenshot below. You just need to select your printer, namely Epson L110.


After selecting the printer, go to the “Ink monitor" In this window you will need to click on the button “Update & Save" to display information about the status of the current printer. At the very bottom of the window the message “Error" and "Counter overflow».


After completing all the above steps, you need to close the program. After that, it should appear in the tray on the desktop. You need to right-click on the program icon and select “Hours counter" And here you can see the current value.


You will see whether your printer’s “diaper” is full, and if it is not, you can count how much time is left before it overflows. After checking this information, again right-click on the SSC Service Utility program icon. We point to the item “Hours counter"And press the button"Reset the work counter" Upon completion of these actions, you need to confirm the counter reset again. And in the end you just need to reboot the system and printer. This completes the process of resetting the “diaper” in the Epson L110 printer.

Download SSC Service Utility for free

Download the program from the official website http://www.ssclg.com/epson.shtml