How to reset the toner counter on a Brother DCP L 2520 printer?

Working with a printer is not that difficult. If the cartridge in this device runs out, you can replace it with a new one or refill the old one. This is where various difficulties arise. But very often users encounter this problem: after refilling the cartridge, the printer displays a message stating that there is not enough toner. And as a result does not print documents. How to deal with this? Different printer models have their own methods. We will tell you how to resolve this situation using the example of the Brother DCP L 2520 device. If you have refilled the cartridge of this printer, but still an error appears about the amount of toner being low, then you just need to reset the printer counter. And for this you need to do the following.

So, you need to go to the Brother DCP L 2520 printer menu. There is a special button on the control panel for this. Then select "General Settings". Confirm your choice by clicking on the " buttonOK".

Next, a menu will open in which you need to select "Replace the toner" and then the item "STOP" change to "CONTINUE". After these steps, restart the printer and it will print again.

It is also worth noting that in some cases, even with the “Toner Low” message popping up, the printer will still print. Most often this is observed on Windows 8 operating systems. If you have refilled a cartridge on your Brother DCP L 2520 printer, but it does not want to print, then reset the toner counter on it.